I know how to wire up a dpdt switch but I can't figure out which wires are which.
On these there was no internal transformer, the jack just went right to the circuit board.
MXR made a power supply with four 1/4" guitar style jacks.
If it turns off and you hear your normal guitar sound, then it has a relay.
There are now quite a few digital delay pedals which can be switched to reverse mode while playing, like the EH memory man with Hazarai.This is a Y cable pc game crack maker studio master collection with a stereo plug on one end which plugs into the device, and two mono plugs on the other side which plug into the input and output of the volume pedal.There is more fuzzface history from Dave Fox on my fuzzface page.If your pedal has a stomp switch and boosts your volume when on, we can do a true bypass mod (if needed) and mount a volume trim pot on the switch inside the pedal.So if you have one of these pedals, there are two ways to make them work: Remove the internal transformer (if there is one) and run the two wires from the board to a jack, and use an external transformer with 24VAC output.
This will not add true bypass however.
This silicon version is brighter and fuzzier, not quite as smooth.
Date codes can be seem on the mini-pots above the lugs (i.e.You have to use an external transformer (wall wart) for these that has an output of 24V AC no matter what input (line) voltage.I know that you are very familiar with the eh 4600 small clones.Mike, I have an old electro-harmonix pedal with an AC cord and built-in transformer, but the transformer died.The bypass mod on a WH-1 is 60 plus.